On the other hand, if you’re looking for an approach as hassle-free as possible, go for option 2 and option 3. If you want to do this with as little 3rd party interference as possible go for option 1.
In what follows, we will go through every method described above. The only drawback of this tool is that it won’t allow you to specify a partition scheme, a file system, or set a custom cluster size. This tool borrows a lot from the functionality of Rufus, but features a more intuitive interface that is friendly to beginners. The third option is to use an open-source tool called Deepin Boot Maker.It’s pretty straightforward as it won’t require you to run any complex commands.
This GUI software will help you create a bootable Windows 11 installer.
It works, but the steps get slightly difficult when you get to the part where you need o install a 3rd party tool called wimlib via Homebrew.
The connected display must be high-definition (at least 720P) with a diagonal line larger than 8 inches and a color channel of 8 bits.
PC must be equipped with UEFI boot mode support, TPM 2.0, DirectX 13, and WDDM 2.0 driver.4 GB of RAM and at least 65 GB storage on your system’s disk (we recommend at least 150 GB).1 GHz or faster CPU with a 64-bit dual-core or multi-core processor.Create Windows 11 instalaltion media from macOSįortunately, you can still create a bootable Windows 11 USB drive installer from macOS, but you need to either go through some 3rd party software or you’ll need to do some terminal work.īut before we get to the actual methods, you should start by ensuring that the target PC is equipped to meet the minimum requirements to support Windows 11. However, things get complicated when you’re stuck on a macOS device with no access to a Windows Machine. If you now want to start from the bootable USB key, leave it plugged in your Mac, reboot and press Alt/Option (⌥) before the Apple logo occurs.For all of its faults, Windows was always known for the fairly easy process of creating an installation media whenever you need to do a clean install or repair install (in-place repair). Mind the small changes from the original ) Note that using /dev/rdiskN might be faster than /dev/diskN and bs= 1m is required since dd would otherwise block forever. Sudo dd if=output.dmg of=/dev/rdiskN bs=1m , where N is the device number acquired previously Unmount the key without ejecting it with.Check the device number of your USB stick, e. g. by.Hdiutil convert -format UDRW -o output input.iso To create an USB stick for general usage:
Sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia -volume /Volumes/Untitled -applicationpath /Applications/Install\ OS\ X\ Mavericks.app -nointeraction In case you want to create a bootable USB stick for OS X Mavericks / OS X Yosemite, there exists a shortcut command (note to change the target disk folder accordingly):